A CNC glue application machine I designed and built
CNC gluemachine for application of glue on lenses

the cnc glue machine

The machine is moved by stepper motors on all 3 axes, the glue is fed from a pressurized vessel containing a gallon bottle.
the glue is UV cured in a pair conveyors that I also built.
I'm not exactly a linux fan, but for this application I used a linux operating system with EMC2 built in.
I can't complain, it interfaces through the parallel port to the stepper controllers and home switches perfectly.
the machine runs on standard G code with the coolant command operating the glue solonoid.


Copyright 2011 AK Motorsports
Sarasota, FL USA